Duerkopp Adler HP Series Additional guide Bedienungsanleitung PDF herunterladen (Seite 79)

EFKA AB220A/320A FP220A/320A

Supplier Level

Code no. 311 with control operation

Code no. 3112 with control panel operation

278 Ad3 Delay time of signal M10 at the start of the seam ms 2550 **) 0 40 A/A/A/A

279 At3 ON period of signal M10 at the start of the seam ms 2550 **) 0 350 A/A/A/A

280 kd1 Delay time output M1 ms 2550 **) 0 0 *) A/A/A/A

281 kt1 ON period output M1 ms 2550 **) 0 100 *) A/A/A/A

282 kd2 Delay time output M2 ms 2550 **) 0 100 *) A/A/A/A

283 kt2 ON period output M2 ms 2550 **) 0 100 *) A/A/A/A

284 kd3 Delay time output M3 ms 2550 **) 0 200 *) A/A/A/A

285 kt3 ON period output M3 ms 2550 **) 0 100 *) A/A/A/A

286 kd4 Delay time output M4 ms 2550 **) 0 300 *) A/A/A/A

287 kt4 ON period output M4 ms 2550 **) 0 100 *) A/A/A/A

288 kdF Delay time until sewing foot On ms 2550 **) 0 380 *) A/A/A/A

289 kt5 ON period output M7 ms 2550 **) 0 1000 A/A/A/A

290 FAM 0 = Lockstitch mode: 26 0 5 C/C/C/B

(FA1, FA2, FA3, FA1+FA2): e. g. Brother

Dürkopp Adler, Mitsubishi, Pfaff, Toyota

»Slide-in strip for V810 and V820 = 1«

2 = Lockstitch mode: e. g. Singer (212 UTT)

»Slide-in strip for V810 and V820 = 1«

3...= Lockstitch mode:

e. g. Dürkopp Adler (models 767, N291)

»Slide-in strip for V810 and V820 = 1«

4 = Chainstitch mode: e. g. (US80A)

»Slide-in strip for V810 = 5«

»Slide-in strip for V820 = 3«

5 = Chainstitch mode in general:

M1, M2, M3 and M4 parallel sequence

»Slide-in strip for V810 = 5«

»Slide-in strip for V820 = 3«

6 = Chainstitch mode with tape cutter and/or

fast scissors and M1 / M2 at the seam end

»Slide-in strip for V810 = 5«

»Slide-in strip for V820 = 3«

7 = Overlock mode: e. g. (AC62AV1461)

»Slide-in strip for V810 = 7«

»Slide-in strip for V820 = 5«

8 = Backlatch mode: Pegasus

»Slide-in strip for V810 = 7«

»Slide-in strip for V820 = 5«

9 = Backlatch mode: Yamato

»Slide-in strip for V810 = 7«

»Slide-in strip for V820 = 5«

10 = Lockstitch mode:

Union Special (63900AMZ »replacement for

US80A«) and on Refrey lockstitch machines

»Slide-in strip for V810 and V820 = 1«

13 = Lockstitch mode: Pfaff (1425, 1525)

»Slide-in strip for V810 and V820 = 1«

14 = Lockstitch mode: Juki (5550-6, 5550-7)

»Slide-in strip for V810 and V820 = 1«

15 = Backlatch mode: Pegasus (SSC100)

»Slide-in strip for V810 = 7«

»Slide-in strip for V820 = 5«

16 = Overlock mode: feed-off-the-arm machines

e. g. Yamato (FD62)

»Slide-in strip for V820 = 7«

17 = Chainstitch mode: Pegasus (stitch lock)

»Slide-in strip for V810 = 5«

»Slide-in strip for V820 = 3«

*) Depending on the selected mode. See table at the beginning of the List of Parameters!

**) When programming the 3-digit or 4-digit control parameter values (without control panel), the 2-digit or 3-digit

value displayed must be multiplied by 10.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Duerkopp Adler HP Series Additional guide Bedienungsanleitung Seite 79

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nähmaschinen Duerkopp Adler HP Series Additional guide