Duerkopp Adler HP Series Additional guide Bedienerhandbuch PDF herunterladen (Seite 12)

EFKA AB220A5111

POS2 OUT - Output for position 2

POS IN - Input for positions (e.g. connection of a sensor)

G1/G2 OUT - Output of generator impulses

TXD/RXD - Serial transmission lines

LSM IN - Possibility of connecting a light barrier module to socket B18/8

(If parameter 239 = 0, the light barrier function is selected.

Identification of the signal when switched to 0V.)

LSM002 - Reflection light barrier module

HSM001 - Hall sensor module

If parameter 239 is set to 1...47, a key can be operated on the input of socket B18/8.

+5V = Connect lefthand pins 1 and 2 with jumper (factory setting)

+15V = Connect righthand pins 3 and 4 with jumper

1) Nominal voltage +15V, 100mA (repluggable to +5V, 100mA)

2) Transistor output with open collector max. 40V, 10mA

*) Front view of the socket (component side) and/or rear view of the plug (soldering side)

B80

B18

1 3

2 4

+5V

KL2351

+15V

ATTENTION!

Before opening the cover, turn power off!

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 83 84

Keine Kommentare

Duerkopp Adler HP Series Additional guide Bedienerhandbuch Seite 12